Out of stock
The Segment Protector for Cabinet Installation provides a robust solution for managing multiple outputs in hazardous environments, specifically designed for use in Zone 2/Div. 2 applications. It supports advanced diagnostics and fault isolation, ensuring reliable operation of connected devices.
The Segment Protector is a critical component in explosion protection systems, enabling the safe operation of instruments in hazardous areas. It is specifically designed for use in environments classified as Zone 2 or Division 2, offering multiple outputs that can be configured for Ex ic (FISCO or Entity) or non-incendive applications. This functionality is essential for maintaining safety and operational integrity in industries such as oil and gas, chemical processing, and pharmaceuticals.
One of the key features of the Segment Protector is its advanced fault isolation at the spur, which helps prevent potential hazards by isolating faults to individual devices, thereby enhancing system reliability. Additionally, it incorporates power, communication, diagnostics, and error LEDs for real-time monitoring and troubleshooting. The inclusion of test points facilitates easy diagnostics, making maintenance straightforward and efficient. Designed to support FOUNDATION Fieldbus H1 and PROFIBUS PA, this product is well-suited for modern industrial applications that require high reliability and robust performance in challenging environments.
| Connection type | pluggable , screw terminal or spring terminal |
| Supplementary information | Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
| Degree of protection | IEC 60529 |
| Self current consumption | see table “”Technical data depending on model”” |
| Shock resistance | 15 g 11 ms |
| Fieldbus standard | IEC 61158-2 |
| Design / Mounting | Cabinet installation |
| Relative humidity | < 95 % non-condensing |
| LED SPURS | red: 2 Hz flashing in short-circuit condition |
| EU-Type Examination Certificate | TV 12 ATEX 098651 X |
| Vibration resistance | EN 60068-2-6 |
| LED COM/ERR | yellow: flashing: fieldbus communication status and physical layer diagnostic status |
| Shock resistance | EN 60068-2-27 |
| Voltage drop trunk In/Out | 0 V |
| IECEx approval | IECEx TUN 12.0015X |
| Climatic conditions | IEC 60721 |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 |
| Marine approval | DNV A-14038 |
| Ambient temperature | -50 … 70 °C (-58 … 158 °F) |
| Terminating resistor | external type M-FT 100 andOmega; +/- 10 % |
| UL approval | E326119 |
| Electromagnetic compatibility | NE 21:2011 |
| Switch | configuration of short-circuit current/rated current |
| Vibration resistance | 1 g , 10 … 150 Hz |
| LED PWR | green: Fieldbus voltage > 10 V and fieldbus terminator is deactivated |
| Dimensions | see table “”Technical data depending on model”” |
| Core cross-section | see table 2 |
| Mass | see table “”Technical data depending on model”” |
| Mounting | DIN rail mounting |
| Housing material | Polycarbonate |
| Degree of protection | IP20 |
| Surge protection | Trunk overvoltage protection if voltage exceeds typ. 39 V, max. 41 V |
| Storage temperature | -50 … 85 °C (-58 … 185 °F) |
| Voltage drop main cable/outputs | max. 1.2 V |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...