Out of stock
The Ultrasonic sensor offers an IO-link interface that facilitates seamless integration with modern automation systems, enabling the transmission of both service and process data. With its programmable capabilities via DTM using PACTWARE, this sensor enhances operational flexibility and efficiency.
Ultrasonic sensors are widely utilized in various industrial applications for precise distance measurement and object detection. These sensors employ ultrasonic waves to detect the presence and position of objects, making them ideal for applications such as level monitoring, presence detection, and automated assembly lines. Their versatility allows them to function effectively in diverse environments, including those with challenging conditions, such as dust, moisture, and varying temperatures.
This product family features advanced capabilities such as programmable sound lobe width and synchronization options, which enhance measurement accuracy and reliability. The integration of temperature compensation technology also ensures consistent performance across a wide temperature range. The combination of switch output and analog output further enhances the utility of these sensors, allowing users to select the most appropriate output method for their specific application requirements.
| LED red | solid red: Error red, flashing: program function, object not detected |
| Temperature influence | 1.5 % from full-scale value (with temperature compensation) 0.2 %/K (without temperature compensation) |
| Repeat accuracy | 0.1 % of full-scale value |
| No-load supply current | 60 mA |
| Range hysteresis | 1 % of the adjusted operating range (default settings), programmable |
| LED green | solid: Power on flashing: Standby mode or IO link communication |
| Switching frequency | 1.5 Hz |
| Load impedance | current output: 300 Ohm voltage output: 1000 Ohm |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Protocol | IO-Link V1.0 |
| Standard target plate | 100 mm x 100 mm |
| Process data witdh | 16 bit |
| Response delay | minimum : 140 ms factory setting: 280 ms |
| Output type | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected Current output 4 mA … 20 mA or voltage output 0 V … 10 V configurable |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| Deviation of the characteristic curve | 0.2 % of full-scale value |
| LED yellow 2 | solid: Object in evaluation range flashing: Learning function, object detected |
| UL approval | cULus Listed, General Purpose |
| Adjustment range | 400 … 6000 mm |
| SIO mode support | yes |
| Resolution | current output: evaluation range [mm]/3200 but 0.35 mm voltage output: evaluation range [mm]/4000 but 0.35 mm |
| Dead band | 0 … 350 mm |
| Sensing range | 350 … 6000 mm |
| Interface type | IO-Link |
| Input/output type | 1 synchronization connection, bidirectional |
| Connection type | Connector plug M12 x 1 , 5-pin |
| CSA approval | cCSAus Listed, General Purpose |
| Transducer frequency | approx. 65 kHz |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Transfer rate | Acyclical: typical 44 Bit/s |
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| LED yellow 1 | solid: Object in evaluation range flashing: Learning function, object detected |
| Mass | 165 g |
| Cycle time | min. 72 ms |
| Degree of protection | IP67 |
| Operating voltage | 10 … 30 V DC , ripple 10 %SS 15 … 30 V voltage output |
| Power consumption | 1 W |
| Voltage drop | 2.5 V |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
