Out of stock
The WirelessHART Adapter is a versatile 1-channel device designed for seamless integration with HART transmitters and current sources. Battery-operated, it not only facilitates wireless communication but also powers field devices, ensuring efficient operation.
The WirelessHART Adapter is engineered to enhance the connectivity of HART-compatible field devices in various industrial applications. By converting standard 2-wire HART signals into a WirelessHART wireless interface, this device enables real-time data transmission and remote monitoring, making it ideal for process automation, oil and gas, and chemical industries.
Designed for direct mounting on HART or 4 mA to 20 mA field devices, the adapter incorporates a rotatable antenna for optimal signal strength. Its ability to power connected field devices while maintaining communication ensures a reliable and efficient operational environment. This product is particularly beneficial in scenarios where traditional wired connections are impractical, such as in hazardous locations where explosion protection is paramount.
| Radio and telecommunication terminal equipment | The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning. |
| Material | plastic |
| Accuracy | current input: 0.125 % of measuring range |
| Output variables | PV: loop current SV, TV, QV:configurable according to user requirement – adapter: temperature, battery voltage, energy consumed and estimated battery life-time – 4 … 20 mA device: scaled or linearized process value – HART device: up to four process variables |
| Influence of ambient temperature | current input: 5 µA/K |
| Designation | battery W-BAT-B2-Li mandatory for use in connection with hazardous areas (order separately) mounting set W-ACC-F8MK threads (NPT 1/2″”, NPT 3/4″”, G 1/2, M20) |
| Ambient temperature | -40 … 80 °C (-40 … 176 °F) |
| Rated voltage | 7.2 V DC , battery operated |
| Connection | terminals 1, 2, 3, 4, 5, 6 multiple wirings available , depending on operating mode |
| Degree of protection | IEC 60529 |
| Mass | approx. 750 g |
| Vibration resistance | 20 … 2000 Hz, 0,01 g2/Hz |
| Parameter assignment | – wireless transmit power: configurable to 0 dBm or 10 dBm (EIRP) – device variables mapping – publishing of up to ten burst messages in a wireless network, period and trigger mode selectable – notification of up to five events from adapter and/or connected device(s) in a wireless network – scaling and linearization of 4 … 20 mA signal of connected analog device – tuning of supply parameters for the connected device – locking/unlocking of device parameterization |
| Degree of protection | IP66 |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 test setup and execution acc. to EN 60068-2-60 |
| Suitable field devices | usable for: – one point-to-point connection with a HART field device, or – one point-to-point connection with a 4 … 20 mA field device, or – up to four externally powered HART field devices operating in multidrop mode |
| Output rated operating current | 4 … 20 mA |
| Current | 4 … 20 mA |
| Dimensions | 92 x 89.5 x 92.8 mm (without cable glands and antenna) |
| Supply | loop power for field devices voltage 8 … 23 V DC, adjustable in steps of 0.1 V |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...