Out of stock
The WirelessHART Gateway facilitates seamless communication between HART-enabled devices and MODBUS systems. It features a robust wireless interface and supports both Ethernet and RS 485 connections for versatile integration.
The WirelessHART Gateway is a critical component in industrial automation, enabling wireless communication for field devices using the HART protocol. This gateway is particularly useful in environments where traditional wired connections may pose safety risks or logistical challenges, such as in hazardous locations. The integration of WirelessHART technology allows for real-time data acquisition and monitoring, enhancing operational efficiency and reliability.
Common applications of the WirelessHART Gateway include process automation, environmental monitoring, and remote asset management across various industries, including chemical, oil and gas, and pharmaceuticals. Its capabilities include graphical network analysis and automatic configuration options, facilitating easy setup and maintenance of wireless networks. The device supports both HART and MODBUS protocols, providing flexible connectivity and integration with existing systems, ensuring that users can leverage their current infrastructure while benefiting from advanced wireless communication solutions.
| Radio and telecommunication terminal equipment | The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning. |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Ambient temperature | -20 … 60 °C (-4 … 140 °F) |
| Degree of protection | IEC 60529 |
| Control elements | 2 push buttons: – restore HART configuration – restore communication configuration DIP switches: – baud rate – RS-485 address – RS-485 termination – security mode |
| Interface 2 | RS-485 |
| Power consumption | < 5 W |
| Degree of protection | IP66/IP67 |
| IECEx approval | IECEx FMG 12.0002 |
| Interface | omnidirectional dipole antenna, removable |
| Display elements | LED PWR (power supply status), one green LED LED COM (communication status), three yellow LEDs LED FLT (fault signal), one red LED |
| Connection | screw terminals for – 0.2 … 4 mm2 (rigid wire) – 0.2 … 2.5 mm2 (flexible wire) |
| Interface 1 | Ethernet 10 BASE-T/100 BASE-TX , full galvanic isolation |
| Communication | WirelessHART specifications – physical layer: IEEE 802.15.4.2006 – frequency band: 2.4 GHz (ISM band, licence free) – transmission rate: 250 kBit/s – maximum transmit power: +10 dBm (EIRP) – transmission range: outdoor 250 m, indoor 50 m (under reference conditions) – communication standard: WirelessHART acc. to IEC 62591 |
| Relative humidity | 5 … 95 %, noncondensing |
| Vibration resistance | EN 60068-2-6 |
| EU-Type Examination Certificate | FM 12 ATEX 0061 |
| Rated voltage | 20 … 30 V DC SELV/PELV |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 test setup and execution acc. to EN 60068-2-60 |
| Interface/interface | basic insulation according to IEC 61140, rated insulation voltage 50 Veff |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| FM approval | Coc3042646 |
| Mounting | wall mounting |
| Mass | approx. 1 kg |
| Dimensions | 258 mm x 114 mm x 84 mm without antenna and cable glands |
| Interface/power supply | basic insulation according to IEC 61140, rated insulation voltage 50 Veff |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...