Out of stock
The Strain Gauge Converter is a versatile 1-channel isolated barrier designed for industrial applications requiring precise measurement and control. It features a 24 V DC supply and is compatible with full or half bridge strain gauge inputs, providing output options of 0 mA to 20 mA or 0 V to 10 V.
The Strain Gauge Converter from Pepperl+Fuchs is engineered for use in environments where intrinsic safety is paramount. This device serves as an isolated barrier, facilitating the integration of strain gauge sensors into control systems while ensuring compliance with stringent safety standards. It is particularly beneficial in applications such as structural monitoring, industrial weighing systems, and process control where accurate strain measurements are critical.
Equipped with an RS-485 interface, the converter enables seamless communication and integration into existing control systems. Users can configure the device via PACTware or directly through the keypad, allowing for tailored settings such as high/low alarm thresholds and line fault detection. The two relay contact outputs further enhance its functionality, making it suitable for applications that require both measurement and alerting capabilities.
| Reaction time | 300 … 850 ms |
| Output I, II | Relay output |
| Connection | Input I: terminals 1+, 2-; Input II: terminals 13+, 14-; Input III: terminals 15+, 14- |
| Output I, II against eachother | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Electromagnetic compatibility | NE 21:2006 |
| Labeling | space for labeling at the front |
| Input I/other circuits | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Line fault detection | downscale -21.5 mA (-10.75 V) or 2 mA (1 V), upscale 21.5 mA (10.75 V) |
| Collective error message | Power Rail |
| Output I, II/other circuits | reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff |
| Type | RS-485 |
| IECEx approval | IECEx TUN 06.0005 |
| Dimensions | 40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) , housing type C3 |
| Degree of protection | IP20 |
| Mass | approx. 250 g |
| EU-Type Examination Certificate | TV 04 ATEX 2531 |
| Ambient temperature | -20 … 60 °C (-4 … 140 °F) |
| Output III | terminals 7-, 8+, 9- non-intrinsically safe |
| Programming interface | programming socket |
| Output III/Programming socket | not available |
| Output III | Analog output |
| Connection side | field side |
| Input I | Signal, analog |
| Rated voltage | 20 … 35 V DC |
| UL approval | E223772 |
| Lead resistance | max. 25 andOmega; per line |
| Ripple | within the supply tolerance |
| Connection | Power Rail or terminals 23+, 24- |
| Display elements | LEDs , display |
| Programmable Tare | 0 … 500 % of span |
| Connection | screw terminals |
| Connection | terminals 1+, 2-, 3+, 4-, 5+, 6- |
| Output III/Input II, III | not available |
| Sensor supply | 1 … 5 V |
| Signal type | Analog input |
| Input I | terminals 1+, 2- Ex ia IIC, Ex iaD |
| Connection | Power Rail or terminals 19+, 20 GND, 21- |
| Input II and III | terminals 13+, 14-; 15+, 14- non-intrinsically safe |
| Other circuits from each other | functional insulation, rated insulation voltage 50 Veff |
| Output I, II | terminals 10, 11, 12; 16, 17, 18 non-intrinsically safe |
| Interface | RS 485 programming jack |
| Input II, III | tare adjustment, calibration and zero |
| Connection | Output I: terminals 10, 11, 12; Output II: terminals 16, 17, 18; Output III: terminals 7-, 8+, 9- |
| Configuration | via operating buttons via PACTware |
| Control elements | Control panel |
| Connection side | control side |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Degree of protection | IEC 60529:2001 |
| Power consumption | max. 3 W |
| Supply | Power Rail or terminals 23+, 24- non-intrinsically safe |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...