Out of stock
The Ultrasonic sensor from Pepperl+Fuchs is designed for precise distance measurement and object detection in various industrial applications. It features an IO-link interface for efficient service and process data management, along with programmable switch outputs for enhanced functionality.
Ultrasonic sensors are essential components in automation and control systems, providing reliable non-contact distance measurement and detection capabilities. These sensors utilize ultrasonic waves to detect objects and measure distances, making them ideal for applications such as level measurement, positioning, and presence detection in challenging environments.
The product family supports advanced features like programmable outputs and temperature compensation, ensuring consistent performance across varying conditions. The selectable sound lobe width allows for tailored detection profiles, while synchronization options enable multiple sensors to operate without interference, enhancing system efficiency. With the ability to be programmed via DTM using PACTWARE, these sensors facilitate easy integration and customization to meet specific application needs.
| Voltage drop | 2.5 V |
| Adjustment range | 120 … 2000 mm |
| LED red | solid red: Error red, flashing: program function, object not detected |
| Operating voltage | 10 … 30 V DC , ripple 10 %SS |
| Output type | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected |
| Sensing range | 90 … 2000 mm |
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| Cycle time | min. 33.6 ms |
| LED yellow 2 | solid: Object in evaluation range flashing: Learning function, object detected |
| LED green | solid: Power on flashing: Standby mode or IO link communication |
| Range hysteresis | 1 % of the adjusted operating range (default settings), programmable |
| Power consumption | 1 W |
| UL approval | cULus Listed, General Purpose |
| Transducer frequency | approx. 200 kHz |
| Degree of protection | IP67 |
| CSA approval | cCSAus Listed, General Purpose |
| Protocol | IO-Link V1.0 |
| SIO mode support | yes |
| No-load supply current | 60 mA |
| Repeat accuracy | 0.1 % of full-scale value |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| Transfer rate | Acyclical: typical 95 Bit/s |
| Mass | 72 g |
| Interface type | IO-Link |
| Switching frequency | 4 Hz |
| LED yellow 1 | solid: Object in evaluation range flashing: Learning function, object detected |
| Standard target plate | 100 mm x 100 mm |
| Response delay | minimum : 65 ms factory setting: 125 ms |
| Input/output type | 1 synchronization connection, bidirectional |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Connection type | Connector plug M12 x 1 , 5-pin |
| Temperature influence | 1.5 % from full-scale value (with temperature compensation) 0.2 %/K (without temperature compensation) |
| Process data witdh | 16 bit |
| Dead band | 0 … 90 mm |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...