Out of stock
The Ultrasonic sensor features an IO-link interface for seamless integration and data exchange, providing both service and process data. With programmable capabilities via DTM using PACTWARE, this sensor offers versatility in application with selectable sound lobe width and temperature compensation.
Ultrasonic sensors are essential components in various industrial applications, designed to measure distances and detect objects through the use of high-frequency sound waves. These sensors emit ultrasonic pulses that reflect off nearby objects, allowing for precise measurement and object detection regardless of the target’s surface characteristics. The Pepperl+Fuchs Ultrasonic sensor series is particularly noted for its robust performance and reliability in demanding environments.
Common applications for these sensors include level measurement, presence detection, and dimensional control in manufacturing processes. The integration of an IO-link interface enhances the communication capabilities, enabling users to access service and process data efficiently. The ability to program the sensor via DTM with PACTWARE offers flexibility in configuration, while features like selectable sound lobe width and synchronization options allow for customization to meet specific operational requirements. Additionally, built-in temperature compensation ensures consistent performance across varying environmental conditions.
| Interface type | IO-Link |
| Protocol | IO-Link V1.0 |
| CSA approval | cCSAus Listed, General Purpose |
| SIO mode support | yes |
| Transducer frequency | approx. 200 kHz |
| LED yellow 2 | solid: Object in evaluation range flashing: Learning function, object detected |
| LED yellow 1 | solid: Object in evaluation range flashing: Learning function, object detected |
| Repeat accuracy | 0.1 % of full-scale value |
| Switching frequency | 4 Hz |
| Cycle time | min. 33.6 ms |
| Range hysteresis | 1 % of the adjusted operating range (default settings), programmable |
| Resolution | current output: evaluation range [mm]/3200 but 0.35 mm voltage output: evaluation range [mm]/4000 but 0.35 mm |
| LED green | solid: Power on flashing: Standby mode or IO link communication |
| Mass | 72 g |
| Deviation of the characteristic curve | 0.2 % of full-scale value |
| LED red | solid red: Error red, flashing: program function, object not detected |
| Load impedance | current output: 300 Ohm voltage output: 1000 Ohm |
| No-load supply current | 60 mA |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Output type | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected Current output 4 mA … 20 mA or voltage output 0 V … 10 V configurable |
| Input/output type | 1 synchronization connection, bidirectional |
| Degree of protection | IP67 |
| Process data witdh | 16 bit |
| Response delay | minimum : 65 ms factory setting: 125 ms |
| Adjustment range | 120 … 2000 mm |
| Transfer rate | Acyclical: typical 95 Bit/s |
| Operating voltage | 10 … 30 V DC , ripple 10 %SS 15 … 30 V voltage output |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Temperature influence | 1.5 % from full-scale value (with temperature compensation) 0.2 %/K (without temperature compensation) |
| Dead band | 0 … 90 mm |
| Connection type | Connector plug M12 x 1 , 5-pin |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| UL approval | cULus Listed, General Purpose |
| Voltage drop | 2.5 V |
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| Sensing range | 90 … 2000 mm |
| Standard target plate | 100 mm x 100 mm |
| Power consumption | 1 W |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...