Out of stock
The Ultrasonic sensor features an IO-link interface that facilitates both service and process data management, enhancing operational efficiency. Its programmable capabilities via DTM with PACTWARE enable customization for specific applications.
Ultrasonic sensors play a crucial role in various industrial applications by providing reliable distance measurement and object detection capabilities. These sensors utilize sound waves to detect the presence and distance of objects, making them ideal for non-contact sensing applications. Commonly employed in automation, robotics, and material handling, these sensors ensure precise measurements in environments where traditional sensors may fall short due to dust, dirt, or other obstructions.
The product family supports a range of features including a switch output and analog output for versatile integration into existing systems. The selectable sound lobe width allows for tailored detection zones, while synchronization options enable multiple sensors to operate without interference. Additionally, temperature compensation ensures consistent performance across varying environmental conditions, making these sensors a reliable choice for demanding applications.
| Degree of protection | IP67 |
| Protocol | IO-Link V1.0 |
| Transducer frequency | approx. 380 kHz |
| Output type | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected Current output 4 mA … 20 mA or voltage output 0 V … 10 V configurable |
| Connection type | Connector plug M12 x 1 , 5-pin |
| Dead band | 0 … 30 mm |
| Repeat accuracy | 0.1 % of full-scale value |
| Cycle time | min. 13.2 ms |
| Process data witdh | 16 bit |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| Operating voltage | 10 … 30 V DC , ripple 10 %SS 15 … 30 V voltage output |
| Range hysteresis | 1 % of the adjusted operating range (default settings), programmable |
| CSA approval | cCSAus Listed, General Purpose |
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| Sensing range | 30 … 500 mm |
| Voltage drop | 2.5 V |
| Response delay | minimum : 25 ms factory setting: 45 ms |
| No-load supply current | 60 mA |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Power consumption | 1 W |
| LED yellow 2 | solid: Object in evaluation range flashing: Learning function, object detected |
| Resolution | current output: evaluation range [mm]/3200 but andge;0.05 mm voltage output: evaluation range [mm]/4000 but andge;0.05 mm |
| LED yellow 1 | solid: Object in evaluation range flashing: Learning function, object detected |
| Temperature influence | 1.5 % from full-scale value (with temperature compensation) 0.2 %/K (without temperature compensation) |
| Deviation of the characteristic curve | 0.2 % of full-scale value |
| UL approval | cULus Listed, General Purpose |
| Load impedance | current output: 300 Ohm voltage output: 1000 Ohm |
| Standard target plate | 100 mm x 100 mm |
| LED green | solid: Power on flashing: Standby mode or IO link communication |
| Interface type | IO-Link |
| Input/output type | 1 synchronization connection, bidirectional |
| Mass | 66 g |
| Rated operating current | 200 mA , short-circuit/overload protected |
| SIO mode support | yes |
| Transfer rate | Acyclical: typical 240 Bit/s |
| Adjustment range | 50 … 500 mm |
| Switching frequency | 11 Hz |
| LED red | solid red: Error red, flashing: program function, object not detected |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...