Description
Standard incremental encoder with normal shaft. The GI355 version has a clamping flange and the GI 356 (GI356) version has a servo flange.
The encoder is highly resistant to external mechanical influences. The casing is made of aluminum, the electrically similar stainless steel version is called GЕ355, and the ATEX version for hazardous areas is called X700.
Specifications:
| Size (flange) | ø58 mm |
| Reverse polarity protection | Yes (4.75...30 VDC) |
| Emitted interference | DIN EN 61000-6-4 |
| Shaft type | ø10 mm solid shaft |
| Operating speed | ≤10000 rpm |
| Output frequency | ≤150 kHz |
| Consumption w/o load | ≤30 mA (24 VDC) ≤60 mA (5 VDC) |
| GI355 output signals | A 90° B, N + inverted |
| Admitted shaft load | ≤20 N axial ≤40 N radial |
| Resistance | DIN EN 60068-2-6 Vibration 10 g, 16-2000 Hz DIN EN 60068-2-27 Shock 200 g, 6 ms |
| Starting torque | ≤0.015 Nm (IP 54) ≤0.03 Nm (IP 65) |
| Connection | Connector M23, 12-pin Cable 1 m |
| Operating temperature | -25...+100 °C (5 VDC) -25...+85 °C (24 VDC) -40...+85 °C (optional) |
| Interference immunity | DIN EN 61000-6-2 |
| Protection DIN EN 60529 | IP 54 (without shaft seal) IP 65 (with shaft seal) |
| Relative humidity | 95 % non-condensing |
| manufacter SKU | GI355 |
| Voltage supply | 5 VDC ±10 % 4.75...30 VDC 10...30 VDC |
| Reference signal | Zero pulse, width 90° |
| Flange | Clamping flange |
| Pulses per revolution | 5...6000 |
| Rotor moment of inertia | 14.5 gcm² |
| Output stages | Linedriver/RS422 Push-pull short-circuit proof |
| Sensing method | Optical |
| Approval | UL approval / E63076 |
| Materials | Housing: aluminium Flange: aluminium |
| Weight approx. | 250 g |
