Description
ITD is a miniature encoder created by Baumer for converting angular displacement of the shaft. The sensor has an incremental principle of operation. It works based on the optical measurement method.
SPECIFICATIONS:
| ITD 01 A 4 Y 4 output signals | A 90° B, 0 |
| Protection DIN EN 60529 | IP 64 |
| Operating temperature | -20...+85 °C |
| Pulses per revolution | 30...1024 |
| Motor shaft tolerance | 0.25 mm axial 0.1 mm radial |
| manufacter SKU | ITD 01 A 4 Y 4 |
| Size (flange) | ø24 mm |
| Materials | Housing: aluminium Shaft: stainless steel |
| Consumption w/o load | ≤25 mA |
| Reverse polarity protection | Yes |
| Relative humidity | 90 % non-condensing |
| Reference signal | Zero pulse, width 90° |
| Starting torque | ≤0.005 Nm (+20 °C) |
| Sensing method | Optical |
| Output stages | TTL Push-pull short-circuit proof |
| Output frequency | ≤100 kHz |
| Weight approx. | 45 g |
| Shaft type | ø4 mm (blind hollow shaft) |
| Voltage supply | 5 VDC ±5 % 8...30 VDC |
| Connection | Cable 1 m |
| Resistance | DIN EN 60068-2-6 Vibration 10 g, 55-2000 Hz DIN EN 60068-2-27 Shock 30 g, 11 ms |
| Operating speed | ≤10000 rpm |
| Mounting kit | 102 |
The connection is made radially with a cable. The output diameter is 24 mm. There is a possibility of HTL from TTL signals.
