Out of stock
The Solenoid Driver is designed for robust performance in intrinsically safe applications, providing reliable isolation and control for solenoids and other devices. It operates on a 24 V DC supply, ensuring versatility in various industrial environments.
The Solenoid Driver is part of the Pepperl+Fuchs family of intrinsic safety barriers, engineered to provide safe and effective control in hazardous environments. These barriers ensure that connected devices can operate without posing a risk of ignition in potentially explosive atmospheres, making them ideal for use in industries such as oil and gas, chemical processing, and pharmaceuticals.
This specific driver features a 2-channel isolated design that allows for either bus or loop-powered operation, accommodating diverse system configurations. With an output capacity of 40 mA at 12 V DC and a current limit of 55 mA, it supports a variety of applications requiring precise control of solenoids. Additionally, it incorporates line fault detection (LFD) capabilities, enhancing system reliability and safety.
Designed for high safety integrity levels, the Solenoid Driver can achieve up to SIL 2 when bus powered and up to SIL 3 when loop powered, in accordance with IEC 61508 standards. Its ability to handle contact or logic control inputs further increases its adaptability across different automation systems.
| Control elements | DIP-switch |
| Fault level | lead short-circuit detection at < 25 andOmega; lead breakage detection at > 100 kandOmega; typical |
| Dimensions | 18 x 106 x 128 mm (0.7 x 4.2 x 5 inch) |
| Fault current | 4 mA pulsing (20 ms ON, 200 ms OFF) |
| Inrush current | 0.2 A , 15 ms loop powered |
| Current limit | 55 mA |
| Labeling | space for labeling at the front |
| Ambient temperature | -20 … 60 °C (-4 … 140 °F) |
| Connection | SL1: 6b |
| Signal level | 1-signal: 15…30 V DC (current limited at 3 mA) or contact close (internal 10 kandOmega; pull-up) 0-signal: 0…5 V DC or contact open |
| Mounting | on Termination Board |
| IECEx approval | IECEx CES 10.0013 |
| Display elements | LEDs |
| Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) |
| Connection side | field side |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Energized/De-energized delay | – bus powered: filter OFF: 1 ms, filter ON: 10 ms – loop powered: switch-on 50 ms, switch-off 6 ms (300 andOmega; load) |
| Connection | SL2: 5a(+), 5b(-), 7a(+); 1a(+), 1b(-), 3b(+) |
| Connection side | control side |
| Certificate | PF 10 CERT 1729 X |
| Coding | pin 1 and 4 trimmed For further information see system description. |
| Output/power supply, inputs, and collective error | safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V |
| Power dissipation | 1 W at 24 V, 300 andOmega; load (per channel) |
| Load | nominal 0.1 … 5 kandOmega; |
| Control input | external switch (dry contact or open collector) non isolated or logic signal input fully floating |
| Output/Output | safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 60 V |
| Internal resistor | approx. 240 andOmega; |
| Connection | SL1: 8a(+), 7a(-); 10a(+), 9a(-) bus powered SL1: 8b(+), 7b(-); 9b(+), 10b(-) loop powered |
| Open loop voltage | approx. 22.5 V |
| Relative humidity | 5 … 90 %, non-condensing up to 35 °C (95 °F) |
| Safety Integrity Level (SIL) | SIL 3 |
| Rated voltage | 20.4 … 30 V DC loop powered 20.4 … 30 V DC bus powered via Termination Board |
| Output type | open collector transistor (internal fault bus) |
| Degree of protection | IP20 |
| Signal type | Digital Output |
| Switching frequency | – bus powered: filter OFF: max. 150 Hz, filter ON: max. 15 Hz – loop powered: max. 10 Hz |
| Mass | approx. 140 g |
| EU-Type Examination Certificate | CESI 10 ATEX 036 |
| Degree of protection | IEC 60529:2001 |
| Voltage | 12 V |
| Configuration | via DIP switches |
| Electromagnetic compatibility | NE 21:2006 For further information see system description. |
| Input current | 62 mA at 24 V, 300 andOmega; load (per channel) |
| Current | 40 mA |
| Power dissipation | 1 W at 24 V, 300 andOmega; load (per channel) for loop powered |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...