Out of stock
The HART Multiplexer Master hid mux 2700 is a robust solution for managing multiple HART field devices through a single communication channel. With a 32-channel capacity and compatibility with HART revisions 5 to 7, it efficiently streamlines data collection and monitoring in industrial settings.
The HART Multiplexer Master is a critical component in industrial automation, designed specifically for the integration of HART field devices into control systems. This multiplexer facilitates the simultaneous connection of up to 32 HART devices, allowing for efficient data management and process control while operating on a 24 V DC supply. The device utilizes an RS-485 interface, ensuring reliable communication across extensive distances and in challenging environments.
Engineered to meet stringent safety standards, this multiplexer achieves up to Safety Integrity Level 3 (SIL 3) according to IEC 61508, making it suitable for use in applications where safety is paramount. Common applications include process industries such as oil and gas, chemical manufacturing, and wastewater treatment, where precise monitoring and control of field devices are essential for operational efficiency and safety compliance.
| Relative humidity | 5 … 95 %, noncondensing |
| Data link type | HART primary and secondary |
| Mass | approx. 140 g |
| Terminating resistor | external 230 … 500 andOmega; standard (up to 1000 andOmega; possible) |
| Input voltage range | 0.12 … 1.5 V ss |
| Transmit amplitude | 200 andOmega; load, 0.43 Vpp < signal < 0.49 Vpp 500 andOmega; load, 1.1 Vpp < signal < 1.2 Vpp |
| Address | 1 … 31 , adjustable via DIP switch |
| Impedance | high impedance |
| Labeling | space for labeling at the front |
| Carrier detect level | signal > 0.12 Vpp, carrier detection activated signal < 0.08 Vpp, carrier detection not activated |
| Signal range | 0.12 Vpp < signal < 1.5 Vpp |
| Interface/power supply | 500 Vrms |
| Common mode clamping | ± 10 V , for transient or AC signals |
| Certificate | CML 17 ATEX 3337 X |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Safety Integrity Level (SIL) | SIL 3 |
| Degree of protection | IEC 60529:2001 |
| Dimensions | 18 x 106 x 128 mm (0.7 x 4.2 x 5 inch) |
| Topology | multi point, master/slave connection |
| Leakage current | < 3 andmicro;A at -20 … 85 °C (-4 … 185 °F) |
| Power dissipation | 0.7 W at 24 V |
| Rated voltage | 20.4 … 30 V DC via Termination Board |
| Degree of protection | IP20 |
| Ambient temperature | -20 … 60 °C (-4 … 140 °F) |
| Type | RS-485 , differential pair and grounding |
| Connection | SL1: 1a, 1b(-); 2a, 2b(+) |
| Rated current | 28 mA at 24 V , RS-485, quiescent current |
| Number of channels | 32 |
| Differential mode clamping | ± 5.2 V , for transient or AC signals |
| Common mode voltage | max. 30 V |
| Transfer rate | 9600 MBit/s, 19200 MBit/s or 38400 MBit/s, selectable via switch |
| Field multi point support | option available upon request |
| DC isolation | dual capacitor each channel |
| Common mode voltage | up to 30 V |
| Display elements | LEDs LED PWR ON (power supply), one green LED LED HART TX (HART transmission), one yellow LED LED FAULT (lead fault), one red LED |
| Output voltage | 400 mV ss (with the terminator resistance specified above) |
| Conformity | HART field device input (revision 5 to 7) |
| Interface/field channels | 1000 Veff |
| Power supply/field channels | 1000 Veff |
| Input impedance | > 5 kandOmega; , according to HART specification |
| Control elements | DIP switches at the housing side for: – unit slave address – baud rate – test mode on/off |
| Device type | DC isolated bus device |
| Output resistance | 100 andOmega; or smaller, capacitive coupling |
| Configuration | via DIP switches |
| Electromagnetic compatibility | NE 21:2012 For further information see system description. |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...