Out of stock
The SMART Transmitter Power Supply is a 1-channel signal conditioner designed to provide a 24 V DC supply for 2-wire SMART transmitters and current sources. This device serves as a signal splitter, offering dual outputs for versatile signal management.
The SMART Transmitter Power Supply is an integral component in the field of process automation, particularly for applications requiring intrinsically safe solutions. This device is engineered to condition and supply power to 2-wire SMART transmitters, facilitating accurate data acquisition in hazardous environments. With its dual output capability, the power supply can deliver both current and voltage signals, catering to a wide range of measurement and control systems.
Commonly utilized in industrial settings, the SMART Transmitter Power Supply is designed to operate reliably in conjunction with various field devices, ensuring optimal performance and safety. Its compliance with SIL 2 according to IEC 61508 standards underscores its suitability for critical applications where safety and reliability are paramount. The provision of terminal blocks with test sockets further enhances its usability, allowing for straightforward installation and maintenance.
| Control elements | DIP-switch |
| Safety Integrity Level (SIL) | SIL 2 |
| Electromagnetic compatibility | NE 21:2012 EN 61326-3-2:2008 |
| Rise time/fall time | 2 ms |
| Frequency range | field side into the control side: bandwidth with 0.5 Vpp signal 0 … 7.5 kHz (-3 dB) control side into the field side: bandwidth with 0.5 Vpp signal 0.3 … 7.5 kHz (-3 dB) |
| Signal type | Analog input |
| Degree of protection | IP20 |
| Power dissipation | approx. 1.4 W at 20 mA transfer current, 250 andOmega; in both outputs |
| Connection | Power Rail or terminals 9+, 10- |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Input signal | 0/4 … 20 mA |
| Voltage drop | terminals 3, 4: 6.1 V at 20 mA |
| Connection side | control side |
| Settling time | 6 ms |
| Output signal | 0/4 … 20 mA or 0/1 … 5 V |
| Degree of protection | IEC 60529:2001 |
| Available voltage | terminals 1+, 2-: 16 V at 20 mA , 18.5 V at 4 mA |
| Short-circuit current | terminals 1+, 2-: 25 mA |
| Deviation | Iout < 20 andmicro;A (0.1 %); Vout < 7.5 mV (0.15 %) incl. calibration, linearity, hysteresis and fluctuation of supply voltage, at 20 °C (68 °F), 0/4 ... 20 mA, 0/1 ... 5 V |
| Input resistance | terminals 1+, 2-: max. 500 andOmega; (250 andOmega; load) |
| Rated voltage | 18 … 30 V DC |
| Configuration | via DIP switches |
| Connection | screw terminals |
| Load | channel 1: 0 … 500 andOmega; (20 mA)/> 1 MandOmega; (5 V) channel 2: 0 … 500 andOmega; (20 mA)/> 1 MandOmega; (5 V) |
| Ripple | max. 50 andmicro;A rms |
| Ambient temperature | -20 … 60 °C (-4 … 140 °F) |
| Note | Both output loads must be connected to ensure complete and correct operation within the technical specification. |
| Connection | source: terminals 5-, 6+; 7-, 8+ sink: terminals 5+, 6-, 7+, 8- |
| Connection | terminals 1+, 2- (sink); 3+, 4- (source) |
| Dimensions | 12.5 x 114 x 122 mm (0.5 x 4.5 x 4.8 inch) , housing type A2 |
| Mass | approx. 100 g |
| Power consumption | 2 W |
| Connection side | field side |
| Display elements | LED |
| Ripple | within the supply tolerance |
| Labeling | space for labeling at the front |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...