Out of stock
The inductive sensor offers a compact design with no unusable area, ensuring optimal performance in various industrial applications. With a 20 mm non-flush sensing capability and compatibility with standard metallic actuating surfaces, it is ideal for a range of automation tasks.
Inductive proximity sensors from Pepperl+Fuchs are essential components in modern automation and control systems. These sensors operate without physical contact, making them suitable for detecting metallic objects in a variety of industrial environments. Their non-flush design eliminates unusable sensing areas, allowing for precise detection even in confined spaces.
This product family is engineered for safety applications, with capabilities to meet standards up to Category 2, Performance Level d (PLd), and Safety Integrity Level 2 (SIL 2). For more critical applications, these sensors can be configured redundantly to achieve Category 3, Performance Level e (PLe), and Safety Integrity Level 3 (SIL 3). Equipped with LED indicators for switching states and fault conditions, they provide reliable feedback for system diagnostics.
The bidirectional and rotatable sensor head enhances installation flexibility, allowing for optimal positioning in various setups. TÃœV certification further ensures compliance with international safety standards, making these sensors a dependable choice for safety-critical applications across diverse industries.
| Error indicator | LED, red |
| Switching function | 2 x normally open (NO) |
| Reduction factor rAl | 0.4 |
| Short-circuit protection | pulsing |
| Reduction factor rBrass | 0.5 |
| Voltage drop | ≤ 3 V |
| Rated operating voltage | 24 V |
| Output type | 4-wire |
| Switching frequency | 0 … 10 Hz |
| Operating current | 1 … 30 mA per output |
| Housing material | PA-GF35 metal base Xylan coated metal mounting flange Xylan coated. |
| Diagnostic Coverage (DC) | min. 60 % |
| Switching state indicator | LED, yellow |
| Mass | 197 g |
| MTTFd | > 7500 a |
| Safety Integrity Level (SIL) | SIL 2 |
| Category | Cat. 2 |
| Rated insulation voltage | 30 V |
| Rated operating distance | 20 mm |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Time delay before availability | ≤ 300 ms |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| Sensing face | PA-GF35 |
| Off-state current | 0 … 0.5 mA |
| Operating voltage | 18 … 30 V |
| Assured release distance of a PDDB | 30 mm |
| Output polarity | DC |
| Degree of protection | IP68 / IP69 |
| Installation | non-flush |
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| Mission Time (TM) | 20 a |
| Actuating element | Reference target according EN IEC 60947-5-2 (FE360 – ST37K) 60 mm x 60 mm x 1 mm |
| Overload resistance | yes |
| No-load supply current | ≤ 15 mA |
| Output type | PNP |
| Connection type | Connector plug M12 x 1 , 4-pin |
| Assured operating distance | 0 … 16.2 mm |
| Altitude | ≤ 2000 m above MSL |
| Performance level (PL) | PL d |
| Hysteresis | typ. 5% |
| Reduction factor rCu | 0.4 |
| Reduction factor r304 | 0.85 |
| Reverse polarity protection | reverse polarity protected |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...