Out of stock
The Distance sensor is designed for precision distance measurement in various industrial applications. It features a compact and robust design that allows for versatile mounting options, making it suitable for space-constrained environments.
The Distance sensor from Pepperl+Fuchs is part of a cutting-edge product family that utilizes Multi Pixel Technology (MPT) for precise and accurate signal evaluation. This technology enables the sensor to deliver reliable distance measurements across a wide range of conditions, making it ideal for applications in automation, logistics, and manufacturing.
Equipped with an IO-link interface, the Distance sensor facilitates easy integration into existing systems, allowing for seamless access to both service and process data. The analog output of 4 … 20 mA provides a straightforward method for interfacing with control systems, ensuring that users can effectively monitor and manage their processes. The medium design and small standardized dimensions further enhance the sensor’s adaptability, enabling it to fit into various installation environments.
| Angle of divergence | 2.5 � |
| Transfer rate | COM 2 (38.4 kBaud) |
| Min. cycle time | 3 ms |
| Control elements | 5-step rotary switch for operating modes selection |
| Mass | approx. 37 g |
| Communication interface | IEC 61131-9 |
| Mission Time (TM) | 20 a |
| MTTFd | 520 a |
| Switching voltage | max. 30 V DC |
| Reference target | standard white, 100 mm x 100 mm |
| Device profile | Identification and diagnosis Smart Sensor type 0/type 3.3 |
| Ripple | max. 10 % |
| Signal output | 1 push-pull output , 1 analog output , short-circuit-proof, reverse polarity protection, surge-proof |
| Connection | 4-pin, M12 x 1 connector, 90� rotatable |
| Housing height | 50.6 mm |
| Housing width | 15 mm |
| Linearity error | 0.75 % |
| Warm up time | 5 min |
| Housing depth | 41.7 mm |
| Temperature drift | 0.05 %/K |
| Response time | 2 ms , see table 1 |
| Voltage drop | 1.5 V DC |
| Protection class | III |
| Degree of protection | IP67 / IP69 / IP69K |
| Usage category | DC-12 and DC-13 |
| Angle deviation | max. +/- 1.5 � |
| SIO mode support | yes |
| Switching type | The default setting is: C/Q – Pin4: NPN normally open, PNP normally closed, IO-Link I�Pin2: analog output 4…20 mA |
| Operating voltage | 18 … 30 V DC |
| Device ID | 0x111902 (1120514) |
| IO-Link Revision | 1.1 |
| Diagnostic Coverage (DC) | 0 % |
| No-load supply current | < 25 mA at 24 V supply voltage |
| Product standard | EN 60947-5-2 |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Ambient temperature | 10 … 50 °C (50 … 122 °F) |
| Compatible master port type | A |
| Switching current | max. 100 mA , resistive load |
| Light source | LED |
| Measurement range | 100 … 550 mm |
| Operation indicator | LED green: constantly on – power on flashing (4Hz) – short circuit flashing with short break (1 Hz) – IO-Link mode |
| Storage temperature | -40 … 70 °C (-40 … 158 °F) |
| Interface type | IO-Link ( via C/Q = pin 4 ) |
| Resolution | 0.1 mm |
| Ambient light limit | EN 60947-5-2 : 45000 Lux |
| Output type | 1 current output: 4 … 20 mA |
| UL approval | E87056 , cULus Listed , class 2 power supply , type rating 1 |
| Function indicator | LED yellow: constantly on – switch output active constantly off – switch output inactive |
| Diameter of the light spot | approx. 20 mm at a distance of 550 mm |
| Control elements | Teach-In key |
| Repeat accuracy | 1 % , see table 1 |
| Light type | modulated visible red light |
| LED risk group labelling | exempt group |
| Process data witdh | Process data input 4 byte Process data output 2 bits |
| Load resistor | > 1 kandOmega; voltage output ; 470 andOmega; current output |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...