Out of stock
The Retroreflective sensor from Pepperl+Fuchs is designed for universal applications, offering exceptional versatility across various environments. Its robust construction ensures reliable operation even in noisy conditions, making it suitable for diverse industrial applications.
The Retroreflective sensor family is engineered to provide effective detection solutions in a broad range of settings, from manufacturing lines to automated logistic systems. These sensors utilize a laser technology that enables long-range detection capabilities, ensuring precise object recognition over extended distances.
Equipped with programmable time functions, these sensors can be customized to meet specific application requirements, including settings for delayed operation and dual-function modes. Their resistance to environmental noise further enhances their reliability, making them ideal for use in challenging conditions where traditional sensors may falter. By integrating these sensors into your systems, you can enhance operational efficiency and ensure consistent performance in automated processes.
| Diameter of the light spot | approx. 45 mm at 30 m |
| Operating voltage | 12 … 240 V AC/DC |
| Reflector distance | 0.3 … 30 m |
| Threshold detection range | 42 m |
| Housing height | 88 mm |
| Reference target | MH82 reflector |
| Housing width | 25.8 mm |
| EAC conformity | TR CU 020/2011 TR CU 004/2011 |
| Mass | 112 g |
| MTTFd | 450 a |
| Switching type | light/dark on switchable |
| Polarization filter | yes |
| Switching voltage | max. 250 V AC/DC |
| Light source | laser diode |
| Ambient temperature | -10 … 50 °C (14 … 122 °F) |
| Connection | terminal compartment with 8 spring-loaded terminals for wire cross section 0.5 … 1.5 mm2 , Insulation stripping 7.5 … 8.5 mm , M16 x 1.5 cable gland |
| Protection class | II, rated insulation voltage 250 V AC with pollution degree 1-2 according to IEC 60664-1 Output circuit insulated from control circuit in accordance with IEC 61140. Caution! The protection class 2 is only valid when the terminal compartment is closed. |
| UL approval | E87056 , cULus Listed Caution: This equipment is considered as open-type equipment. It must be mounted within an enclosure, that is suitably designed for protection against internal fire and personal injury resulting from accessibility to live parts according UL 508. |
| Control elements | sensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light-on/dark-on changeover switch |
| Degree of protection | IP67 |
| Function indicator | 2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted |
| Housing depth | 65.5 mm |
| Light type | modulated visible red light |
| Storage temperature | -20 … 75 °C (-4 … 167 °F) |
| Angle of divergence | Emitter: < 0.1 ° Receiver: < 2 ° |
| Laser safety | EN 60825-1 |
| Switching current | max. 2 A |
| Switching frequency | 25 Hz |
| Power consumption | 3.5 VA |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Timer function | ON delay (GAN), OFF delay (GAB), one shot (IAB), ON delay-one shot (GAN-IAB), ON delay-OFF delay (GAN-GAB), programmable adjustment interval 0.1 … 10 s |
| CCC approval | Certified by China Compulsory Certification (CCC) |
| Switching power | DC: max. 50 W AC: max. 500 VA |
| Signal output | Relay, 1 alternator |
| FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 |
| Response time | 20 ms |
| Effective detection range | 0 … 30 m |
| Product standard | EN 60947-5-2 |
| Operation indicator | LED green |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...