Out of stock
The Ultrasonic sensor features two independent switch outputs and an extremely small unusable area, making it highly efficient for precise distance measurement and object detection. It offers adjustable interference suppression and temperature compensation, ensuring reliable performance in various environmental conditions.
The Ultrasonic sensors from Pepperl+Fuchs are designed for a wide range of applications requiring precise distance measurement and reliable object detection. These sensors utilize ultrasonic waves to detect objects and measure distances, making them ideal for automation, material handling, and safety applications. Their compact design allows for easy installation in tight spaces while maintaining high performance standards.
One of the key features of these sensors is their ability to provide two independent switch outputs, which can be configured as normally open (NO) or normally closed (NC). This flexibility enhances their adaptability in various control systems. Additionally, the sensors include a TEACH-IN function for easy setup, allowing users to quickly configure the detection ranges. With temperature compensation and adjustable interference suppression, these ultrasonic sensors ensure consistent performance even in challenging environments.
| Temperature influence | � 1 % of full-scale value |
| Connection type | Connector M12 x 1 , 5-pin |
| CSA approval | cCSAus Listed, General Purpose |
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| LED yellow 2 | solid: switching state switch output 2 flashing: program function |
| Dead band | 0 … 350 mm |
| UL approval | cULus Listed, General Purpose |
| Voltage drop | 2.5 V |
| Response delay | approx. 650 ms |
| Synchronization | bi-directional 0 level -UB…+1 V 1 level: +4 V…+UB input impedance: > 12 KOhm synchronization pulse: 100 micro/s, synchronization interpulse period: 2 ms |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Sensing range | 350 … 6000 mm |
| Rated operating current | 200 mA , short-circuit/overload protected |
| Default setting | Switch point A1: 400 mm , Switch point A2: 6000 mm , wide sound lobe |
| LED yellow 1 | solid: switching state switch output 1 flashing: program function |
| LED red | normal operation: “”fault”” program function: no object detected |
| LED green | solid green: Power on |
| Output type | 2 switch outputs PNP, NO/NC selectable |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 65 kHz |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| Adjustment range | 400 … 6000 mm |
| Repeat accuracy | 0.5 % of switching point |
| Switching frequency | 0.6 Hz |
| No-load supply current | 60 mA |
| Mass | 210 g |
| Operating voltage | 10 … 30 V DC , ripple 10 %SS |
| Degree of protection | IP54 |
| Range hysteresis | 1 % of the set operating distance |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...