Out of stock
The Ultrasonic sensor features an IO-Link interface for seamless integration of process data, parameterization, and diagnostics. Equipped with advanced programming options via DTM with PACTWARE and IrDA, it allows for customized configurations to meet specific application needs.
Ultrasonic sensors from Pepperl+Fuchs are designed for precise distance measurement and object detection in various industrial applications. Utilizing ultrasonic waves, these sensors can effectively measure distances in environments where traditional sensors might struggle due to dust, smoke, or other obstructions. They are particularly suitable for applications in logistics, manufacturing, and automation, where reliable and accurate sensing is critical.
Equipped with features such as selectable sound lobe width and synchronization options, these sensors can be tailored to specific operational requirements. The enhanced temperature compensation ensures stable measurement values shortly after activation, providing quick readiness for use. The integration of both digital push-pull output and analog output facilitates versatile connectivity and data transmission, making these ultrasonic sensors an ideal choice for modern automated systems.
| Single head system | ||
| Sensing range | 70 … 1000 mm | |
| Adjustment range | 90 … 1000 mm | |
| Dead band | 0 … 70 mm | |
| Standard target plate | 100 mm x 100 mm | |
| Transducer frequency | approx. 255 kHz | |
| Response delay | minimum : 28 ms factory setting: 56 ms |
|
| Sensor cycle time | �� 14 ms (factory setting) ; programmable to 60 s |
|
| Temperature influence | with temperature compensation: �� � 0.75% of the end value 10 min after switching on the sensor (factory setting) with enhanced temperature compensation: �� � 0.75% of the end value 2 min after switching on the sensor without temperature compensation: 0.17 %/K |
|
| Non-volatile memory | EEPROM | |
| Write cycles | 300000 | |
| LED green | solid: power on flashing: standby mode or IO-Link communication |
|
| LED yellow | solid: object in evaluation range flashing: switch point programming, object detected |
|
| LED red | solid: error flashing: switch point programming, object not detected |
|
| Operating voltage | 10 … 30 V DC , ripple 10 %SS | |
| No-load supply current | �� 60 mA | |
| Power consumption | �� 1000 mW | |
| Time delay before availability | �� 300 ms | |
| Interface type | IO-Link (via C/Q = Pin 4) | |
| IO-Link revision | 1.1 | |
| Device profile | Smart Sensor Profile 2 | |
| Process data width | 32 bit | |
| Device ID | 0x300604 (3147268) | |
| Transfer rate | COM2 (38.4 kBit/s) | |
| Min. cycle time | 3 ms | |
| SIO mode support | yes | |
| Compatible master port type | Class A Class B (use 3-pole adapter or 3-wire cable) |
|
| Interface type | IrDA (infrared interface) | |
| Mode | point-to-point connection | |
| Transfer rate | 115.2 kBit/s | |
| Maximum communication distance | 5 cm | |
| Input/output type | 1 synchronization connection, bidirectional | |
| 0 Level | 0 … 1 V | |
| 1 Level | 2.5 V … UB | |
| Input impedance | > 22 kΩ | |
| Output rated operating current | current source < 2.5 mA | |
| Pulse length | �� 1 ms with external control, low active | |
| Synchronization frequency | ||
| Common mode operation | �� 71 Hz | |
| Multiplex operation | �� 71 Hz / n , n = number of sensors , n �� 10 | |
| Output type | 1 push-pull output , short-circuit protected , reverse polarity protected | |
| Rated operating current | 100 mA , short-circuit/overload protected | |
| Switching frequency | factory setting: 10 Hz programmable to 23 Hz |
|
| Voltage drop | �� 2.5 V | |
| Repeat accuracy | �� � 0.1 % of full-scale value | |
| Range hysteresis | 1 % of the adjusted operating range (default settings), programmable , min. 1 mm | |
| Off-state current | �� 100 �A | |
| Output type | 1 analog output 0 (4) … 20 mA or 1 analog output 0 … 10 V |
|
| Resolution | current output: evaluation range [mm]/3200 but �� 0.35 mm voltage output: evaluation range [mm]/4000 but �� 0.35 mm |
|
| Deviation of the characteristic curve | �� � 1 % of full-scale value | |
| Repeat accuracy | �� � 0.1 % of full-scale value | |
| Load resistor | current output: �� 500 ٠voltage output: �� 1000 ٠|
|
| Standard conformity | ||
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 EN 60947-5-7:2003 IEC 60947-5-7:2003 IEC 61131-9:2013 |
|
| UL approval | cULus Listed, Class 2 Power Source | |
| CCC approval | CCC approval / marking not required for products rated ��36 V | |
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) | |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) | |
| Connection type | Connector plug M12 x 1 , 5-pin | |
| Housing diameter | 18 mm | |
| Degree of protection | IP67 | |
| Material | ||
| Housing | stainless steel (1.4305 / AISI 303)>BR>PA, PC, POM and PBT plastic parts | |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam | |
| Installation position | any position | |
| Mass | 45 g | |
| Tightening torque, fastening screws | max. 30 Nm | |
| Output 1 | near switch point: 90 mm far switch point: 1000 mm Output mode: Window mode output behavior: NO contact |
|
| Output 2 | near limit: 90 mm far limit: 1000 mm Output mode: rising ramp output behavior: Current output 4 mA … 20 mA |
|
| Beam width | wide | |
| ECLASS 13.0 | 27272803 | |
| ECLASS 12.0 | 27272803 | |
| ECLASS 11.0 | 27272803 | |
| ECLASS 10.0.1 | 27272803 | |
| ECLASS 9.0 | 27272803 | |
| ECLASS 8.0 | 27272803 | |
| ECLASS 5.1 | 27272803 | |
| ETIM 9.0 | EC001849 | |
| ETIM 8.0 | EC001849 | |
| ETIM 7.0 | EC001849 | |
| ETIM 6.0 | EC001849 | |
| ETIM 5.0 | EC001849 | |
| UNSPSC 12.1 | 41111960 | |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...