Out of stock
The Ultrasonic sensor features an IO-Link interface for seamless integration of service and process data. It provides continuous distance measurements via IO-Link process data and offers programmable functionality through DTM with PACTWARE.
The Ultrasonic sensors from Pepperl+Fuchs are advanced devices designed for accurate distance measurement and object detection in various industrial applications. Utilizing ultrasonic technology, these sensors emit sound waves and analyze the reflected signals to determine the proximity of objects, making them ideal for automation and process control tasks.
These sensors are equipped with an IO-Link interface, allowing for efficient data transfer and monitoring, including temperature compensation and selectable sound lobe widths. The synchronization options enhance their performance in complex systems, while the push-pull output ensures compatibility with various control systems. Common applications include level measurement, object detection in conveyor systems, and automated guided vehicles where precise distance measurement and reliable operation are essential.
| IO-Link Revision | 1.1 |
| Transfer rate | COM 2 (38.4 kBaud) |
| Temperature influence | � 0.75 % of the end value (with temperature compensation) |
| No-load supply current | 40 mA |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| Min. cycle time | 2.3 ms |
| Response delay | minimum : 8 ms factory setting: 29 ms |
| Dead band | 0 … 20 mm |
| Operating voltage | 10 … 30 V DC , ripple 10 %SS |
| Write cycles | 300000 |
| Installation position | any position |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Output type | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected |
| UL approval | cULus Listed, Class 2 Power Source |
| SIO mode support | yes |
| LED red | solid: error flashing: switch point programming, object not detected |
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| LED green | solid: Power on flashing: Standby mode or IO-Link communication |
| Sensing range | 20 … 250 mm |
| Repeat accuracy | � 0.1 % of full-scale value |
| Adjustment range | 25 … 250 mm |
| Connection type | Connector plug M8 x 1 , 4-pin |
| Compatible master port type | A |
| Standard target plate | 10 mm x 10 mm |
| Range hysteresis | 1 % of the adjusted operating range (default settings), programmable , min. 1 mm |
| Transducer frequency | approx. 400 kHz |
| Non-volatile memory | EEPROM |
| Sensor cycle time | 8 ms (factory setting) ; programmable to 60 s |
| Mass | 9 g |
| Beam width | wide |
| LED yellow | solid: object in evaluation range flashing: switch point programming, object detected |
| Rated operating current | 100 mA , short-circuit/overload protected |
| Device ID | 0x300300 (3146496) |
| Process data witdh | 16 bit |
| Input/output type | 1 synchronization connection, bidirectional |
| Output | near switch point: 25 mm far switch point: 250 mm Output mode: Window mode Output logic: normally open |
| Tightening torque, fastening screws | max. 0.2 Nm |
| Interface type | IO-Link (via C/Q = Pin 4) |
| Voltage drop | 2.5 V |
| Device profile | Smart Sensor |
| Time delay before availability | 300 ms |
| Switching frequency | factory setting: 20 Hz programmable max. 45 Hz |
| Degree of protection | IP67 |
| Power consumption | 400 mW |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...