Out of stock
The ultrasonic sensor features an IO-link interface for streamlined service and process data communication, ensuring high efficiency in various applications. Its programmable capabilities via DTM with PACTWARE allow for flexible customization to meet specific operational requirements.
Pepperl+Fuchs ultrasonic sensors are designed for precise distance measurement and object detection in industrial applications. Utilizing ultrasonic waves, these sensors excel in environments where traditional sensing methods may be hindered by dust, dirt, or other obstructions. Their robust design and advanced technology make them suitable for a wide range of automation tasks, including level monitoring, proximity detection, and material handling.
The sensors provide continuous distance values through IO-Link process data, facilitating real-time monitoring and control. Features such as selectable sound lobe width and synchronization options enhance their adaptability to various applications, while temperature compensation ensures reliable performance across different environmental conditions. The push-pull output further simplifies integration into existing control systems, making these ultrasonic sensors a versatile choice for modern industrial automation.
| Beam width | wide |
| Device ID | 0x300302 (3146498) |
| No-load supply current | 40 mA |
| SIO mode support | yes |
| Compatible master port type | A |
| Degree of protection | IP67 |
| Write cycles | 300000 |
| IO-Link Revision | 1.1 |
| Output type | 1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| UL approval | cULus Listed, Class 2 Power Source |
| LED red | solid: error flashing: switch point programming, object not detected |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| Installation position | any position |
| Standard target plate | 100 mm x 100 mm |
| Power consumption | 400 mW |
| Operating voltage | 10 … 30 V DC , ripple 10 %SS |
| Time delay before availability | 300 ms |
| Input/output type | 1 synchronization connection, bidirectional |
| LED yellow | solid: object in evaluation range flashing: switch point programming, object detected |
| Device profile | Smart Sensor |
| Sensing range | 60 … 800 mm |
| Adjustment range | 70 … 800 mm |
| Transducer frequency | approx. 255 kHz |
| Repeat accuracy | � 0.1 % of full-scale value |
| Response delay | minimum : 13 ms factory setting: 49 ms |
| Tightening torque, fastening screws | with M3 nuts max. 0.2 Nm with M18 nuts max. 1 Nm |
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) When fixing with one M18 nut, the temperature range begins with 0 °C (32 °F). |
| Connection type | Connector plug M8 x 1 , 4-pin |
| Min. cycle time | 2.3 ms |
| Switching frequency | factory setting: 12 Hz programmable max. 27 Hz |
| Temperature influence | � 0.75 % of the end value (with temperature compensation) |
| Range hysteresis | 1 % of the adjusted operating range (default settings), programmable , min. 1 mm |
| Sensor cycle time | 13 ms (factory setting) ; programmable to 60 s |
| Process data witdh | 16 bit |
| Dead band | 0 … 60 mm |
| Interface type | IO-Link (via C/Q = Pin 4) |
| Rated operating current | 100 mA , short-circuit/overload protected |
| Non-volatile memory | EEPROM |
| LED green | solid: Power on flashing: Standby mode or IO-Link communication |
| Output | near switch point: 70 mm far switch point: 800 mm Output mode: Window mode Output logic: normally open |
| Mass | 13 g |
| Voltage drop | 2.5 V |
| Transfer rate | COM 2 (38.4 kBaud) |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...