Out of stock
The Ultrasonic sensor is engineered for precise distance measurement and object detection in various applications. It features an IO-Link interface for easy parameterization and programming through DTM with PACTWARE.
Ultrasonic sensors are widely utilized in industrial automation for non-contact distance measurement and object detection. These sensors emit ultrasonic sound waves and measure the time it takes for the waves to return after reflecting off an object. This technology enables accurate detection of both solid and liquid materials, making it suitable for diverse applications such as level monitoring, object positioning, and presence detection.
One of the key features of this product family is the selectable sound lobe width, allowing users to tailor the detection area based on specific requirements. Additionally, synchronization options are available, facilitating the use of multiple sensors in close proximity without interference. The built-in temperature compensation ensures consistent performance across varying environmental conditions, while the analog output provides real-time data for integration into control systems.
| Degree of protection | IP67 |
| Load impedance | current output: 500 Ohm voltage output: 1000 Ohm |
| Transducer frequency | approx. 255 kHz |
| Ambient temperature | current output -25 … 60 °C (-13 … 140 °F) voltage output -25 … 70 °C (-13 … 158 °F) When fixing with one M18 nut, the temperature range for each begins with 0 °C (32 °F). |
| Response delay | minimum : 13 ms factory setting: 49 ms |
| Adjustment range | 70 … 800 mm |
| Repeat accuracy | � 0.1 % of full-scale value |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| Sensing range | 60 … 800 mm |
| Standard target plate | 100 mm x 100 mm |
| Input/output type | 1 synchronization connection, bidirectional |
| Mass | 13 g |
| Resolution | current output: evaluation range [mm]/3200 but 0.35 mm voltage output: evaluation range [mm]/4000 but 0.35 mm |
| Dead band | 0 … 60 mm |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| Sensor cycle time | 13 ms (factory setting) ; programmable to 60 s |
| LED yellow | solid: object in evaluation range flashing: programming of the limits, object detected |
| Temperature influence | � 0.75 % of the end value (with temperature compensation) |
| Interface type | IO-Link (after individual activation via programming button) |
| LED red | solid: fault Flashing: programming limits, object not detected |
| Tightening torque, fastening screws | with M3 nuts max. 0.2 Nm with M18 nuts max. 1 Nm |
| Output type | 1 analog output 0 (4) … 20 mA or 1 analog output 0 … 10 V |
| Deviation of the characteristic curve | � 1 % of full-scale value |
| LED green | solid: Power on flashing: Standby mode or IO-Link communication |
| No-load supply current | 50 mA |
| Operating voltage | 18 … 30 V DC , ripple 10 %SS |
| UL approval | cULus Listed, Class 2 Power Source |
| Connection type | Connector plug M8 x 1 , 4-pin |
| Power consumption | 500 mW |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...