Out of stock
The AS-Interface I/O module is engineered for seamless integration of 3-wire sensors and DC roller motors within industrial automation systems. It facilitates efficient communication and monitoring of connected devices.
The AS-Interface I/O module is a versatile device designed for industrial environments, allowing for the effective management of inputs from various 3-wire sensors and outputs for DC roller motors. This module is particularly valuable in applications requiring precise control and monitoring of machinery, such as conveyor systems and automated assembly lines.
Equipped with M8 connectors, the module simplifies the connection process for motors and sensors, ensuring reliable performance in demanding conditions. The configurable starting ramp feature enhances motor control, while communication monitoring ensures operational integrity. A unique cable piercing method using gold-plated contact pins guarantees optimal connectivity and longevity, making this module an essential component for robust industrial automation solutions.
| Cable length | 0.5 m |
| Rated operating voltage | 26.5 … 31.6 V from AS-Interface |
| Climatic conditions | For indoor use only |
| Storage temperature | -25 … 85 °C (-13 … 185 °F) |
| Altitude | 2000 m above MSL |
| LED FUSE | Motor power supply; 2 green LEDs |
| Mass | 250 g |
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| Input filter | 2 ms |
| Mounting | 2 clips with andempty; 8 mm drill hole |
| Number/Type | 2 outputs for DC roller motors (MOT1, MOT2) |
| Number/Type | 4 Inputs for 3-wire sensors (PNP), DC |
| Degree of protection | IP54 according to EN 60529 |
| Slave type | Standard slave |
| Supply | from external auxiliary voltage UAUX |
| Input current | 6 mA (internally limited) |
| LED DIR | Motor rotation direction; yellow LED |
| Rotation direction signal | PNP digital output low: high impedance high; (VAUX – 2.5 V) in no-load operation |
| Switching point | according to DIN EN 61131-2 0 (undamped) 0.5 mA 1 (damped) 2.0 mA |
| AS-Interface | EN 62026-2:2013 |
| LED IN | switching state (input); 4 LED yellow |
| Input | EN 61131-2:2007 |
| Required master specification | V2.1 |
| Note | The flat cable routing is designed for 100 actuation cycles |
| Signal delay | < 1 ms (input/AS-Interface) |
| LED AUX | ext. auxiliary voltage UAUX; dual LED green/red green: voltage OK red: reverse voltage |
| Overload protection | fuse , I2t = 53.7 A2s |
| Connection | AS-Interface, AUX: Insulation piercing technology Yellow flat cable/black flat cable Inputs/outputs: M8 round plug connector in accordance with EN 61076-2-104 Inputs: LF004-GS1-A (4-pin, bushing contacts, screw lock, A-coded) Matching connector: LM004-Gx1-A or similar Outputs: LF005-GS1-B (5-pin, bushing contacts, screw lock, B-coded) Matching connector: LM005-Gx1-B or similar |
| Degree of protection | EN 60529:2000 |
| LED PWR | AS-Interface voltage; green LED green: voltage OK green flashing: address 0 or sensor supply overload or speed signal overload or external auxiliary voltage UAUX missing |
| Rated operating current | 25 mA (without sensors) / max. 170 mA |
| MTBF | 98 a |
| Motor start signal | PNP digital output low: high impedance high; (VAUX – 2.5 V) in no-load operation |
| Pollution degree | 2 |
| ID2 code | E |
| Emitted interference | EN 61000-6-4:2007 |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
| Relative humidity | 85 % non-condensing |
| Auxiliary voltage (output) | 18 … 30 VDC PELV |
| Profile | S-7.0 |
| UL File Number | E223772 “”For use in NFPA 79 Applications only”” |
| Supply | from AS-Interface |
| LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of sensor supply or speed signal overload or external auxiliary voltage UAUX missing |
| Shock and impact resistance | 30 g, 11 ms in 6 spatial directions, 3 shocks |
| Vibration resistance | 0.35 mm / 2 g 10 … 1000 Hz |
| ID code | 0 |
| Data bits (function via AS-Interface) | |
| Current loading capacity | 100 mA , overload and short-circuit protected |
| IO code | 7 |
| AS-Interface specification | V3.0 |
| Current | 2 A , max. 5 A (<2 s) per motor |
| Fieldbus standard | EN 62026-2:2013 |
| LED MOT | Motor active; 2 yellow LEDs |
| ID1 code | F |
| Velocity signal | 0 … 10 V DC Control via parameter P2:0 |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...