Out of stock
The AS-Interface sensor/actuator module is designed for seamless integration and communication with various sensor and actuator devices in industrial automation environments. Its mechanical and color-coded terminals simplify installation and maintenance, making it an efficient choice for system integrators.
The AS-Interface sensor/actuator module is a crucial component in industrial automation systems, facilitating communication between sensors and actuators via a single network. This module supports both 2-wire and 3-wire sensor inputs, enabling compatibility with a broad range of devices. Its isolated relay output provides reliable control for various applications, enhancing operational safety and efficiency.
In addition to its versatile input options, the module features an addressing jack for easy configuration and a selectable power supply that can either be sourced externally or from the module itself. This flexibility allows users to optimize their setup according to specific operational requirements. Furthermore, the function display offers real-time monitoring of bus status, internal sensor supply, and the operational status of inputs and outputs, ensuring quick diagnostics and improved maintenance capabilities.
| Relative humidity | 85 % , noncondensing |
| MTTFd | 300 a |
| Voltage | 21 … 31 V DC (INT) |
| Rated operating voltage | 26.5 … 31.6 V from AS-Interface |
| Degree of protection | EN 60529:2000 |
| Fieldbus standard | EN 62026-2:2013 |
| LED PWR | AS-Interface voltage; LED green |
| Ambient temperature | -25 … 60 °C (-13 … 140 °F) |
| Data bits (function via AS-Interface) | |
| Electromagnetic compatibility | NAMUR NE 21: 1998-08 |
| Auxiliary voltage (input) | 12 … 30 V DC PELV |
| Pollution degree | 2 |
| Control circuit | 8 mA per relay (from AS-Interface) |
| Number/Type | 4 inputs for 2- or 3-wire sensors (PNP), DC |
| LED INT | Internal input supply active; LED green |
| Input/Output | safe isolation, rated insulation voltage 300 V AC |
| Switching delay | < 10 ms (AS-Interface/contact) |
| Usage category | DC-13 and AC-14 |
| Diagnostic Coverage (DC) | 0 % |
| Mounting | DIN mounting rail |
| Altitude | 2000 m above MSL |
| Required master specification | V2.0 |
| IO code | 7 |
| Parameter bits (programmable via AS-i) | function |
| Signal delay | < 2 ms (input/AS-Interface) |
| Supply | from AS-Interface (switch position INT, default settings) or external UEXT (switch position EXT) |
| AS-Interface | EN 62026-2:2013 |
| Current loading capacity | 150 mA, overload- and short-circuit protected (INT) |
| Input/AS-Interface | Switch position INT: None Switch position EXT: reinforced insulation, rated insulation voltage 66 V DC |
| Galvanic isolation | EN 60664-1:2007 |
| Surge protection | O1 … O4: Over voltage category II UEXT, Ue: Over voltage category III, safe isolated power supplies (PELV) |
| UL File Number | E106378 |
| Number/Type | 4 relay outputs, normally open |
| Climatic conditions | For indoor use only |
| Output/Output | basic insulation, rated insulation voltage 300 V AC |
| Degree of protection | IP20 |
| Mission Time (TM) | 20 a |
| Output/AS-Interface | safe isolation, rated insulation voltage 300 V AC |
| Rated operating current | 35 mA (no sensors)/max. 210 mA |
| ID code | 0 |
| Slave type | Standard slave |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| Tightening torque of clamping screws | 0.5 Nm … 0.6 Nm |
| ID1 code | F |
| LED FAULT | Fault display; Red LED red: Communication fault or address is 0 red, flashing: Overload, internal input supply |
| Profile | S-7.0 |
| Supply | none |
| LED OUT | Switching state (output); 4 LED yellow |
| AS-Interface specification | V2.1 |
| Input current | 8 mA (limited internally) |
| LED IN | switching state (input); 4 LED yellow |
| ID2 code | E |
| Storage temperature | -25 … 85 °C (-13 … 185 °F) |
| Connection | removable terminals rated connection capacity: rigid/flexible (with and without wire-end ferrules): 0.25 mm2 … 2.5 mm2 for multiple-wire connection with two wires of equal cross-section: flexible with twin wire-end ferrules: 0.5 mm2 … 1.5 mm2 |
| Mass | 170 g |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...