Out of stock
The AS-Interface sensor/actuator module provides a robust solution for connecting sensors and actuators in industrial automation systems. With features like communication monitoring and removable terminals, this module enhances system reliability and ease of maintenance.
The AS-Interface sensor/actuator module serves as a critical interface in industrial automation, facilitating seamless communication between sensors and actuators. It is designed to accommodate both 2-wire and 3-wire sensors, providing flexibility in sensor integration. The module supports external power supply options, allowing for versatile configurations tailored to specific application needs.
This product features a function display that monitors various operational parameters, including bus status and sensor supply. Additionally, it incorporates a red LED indicator for each channel, alerting users to output overload conditions. The switchable lead breakage detection enhances reliability, ensuring that faults are promptly identified and addressed. These capabilities make the AS-Interface sensor/actuator module suitable for a wide range of applications in manufacturing, process automation, and machinery control.
| Auxiliary voltage (output) | 20 … 30 V DC PELV |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| AS-Interface specification | V3.0 |
| UL File Number | E223772 |
| Supply | from external auxiliary voltage UAUX |
| ID code | 0 |
| Rated operating voltage | 26.5 … 31.6 V from AS-Interface |
| Fieldbus standard | EN 62026-2:2013 |
| Diagnostic Coverage (DC) | 0 % |
| Parameter bits (programmable via AS-i) | function |
| Surge protection | UEXT, UAUX, Ue: Over voltage category III, safe isolated power supplies (PELV) |
| ID1 code | F |
| Input current | 9 mA (limited internally) |
| Data bits (function via AS-Interface) | |
| Emitted interference | EN 61000-6-4:2007 |
| Rated operating current | 35 mA (without sensors) / max. 190 mA |
| Number/Type | 4 inputs for 2- or 3-wire sensors (PNP), DC |
| Required master specification | V2.0 |
| Connection | removable terminals rated connection capacity: rigid/flexible (with and without wire-end ferrules): 0.25 mm2 … 2.5 mm2 for multiple-wire connection with two wires of equal cross-section: flexible with twin wire-end ferrules: 0.5 mm2 … 1.5 mm2 |
| Ambient temperature | -25 … 60 °C (-13 … 140 °F) |
| LED FAULT | Error display; red LED red: communication error, i.e. address is 0 red flashing: overload internal input supply, i.e. overload or lead interruption outputs |
| Usage category | DC-13 |
| Current | 2 A per output, sum 4A (TB 40 °C) 0.5 A per output, total 2A (TB 60 °C, arranged in series without gaps) 2 A per output, total 4A (TB 60 °C, arranged in series with 5 mm gap) |
| Mass | 150 g |
| LED IN | switching state (input); 4 LED yellow |
| Mission Time (TM) | 20 a |
| Slave type | Standard slave |
| Supply | from AS-Interface (switch position INT, default settings) or external UEXT (switch position EXT) |
| LED INT | Internal input supply active; LED green |
| Tightening torque of clamping screws | 0.5 Nm … 0.6 Nm |
| Degree of protection | IP20 |
| AS-Interface | EN 62026-2:2013 |
| Altitude | 2000 m above MSL |
| Pollution degree | 2 |
| LED OUT | switching state (output); 4 LED yellow/red yellow: output active red: output overload or lead interruption |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
| Number/Type | 4 electronic outputs, PNP, overload and short-circuit proof |
| Profile | S-7.0 |
| Climatic conditions | For indoor use only |
| Storage temperature | -25 … 85 °C (-13 … 185 °F) |
| Protection class | III |
| Signal delay | < 1 ms (input/AS-Interface) |
| Voltage | 21 … 31 V DC (INT) |
| Input | EN 61131-2:2004 |
| LED PWR | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 |
| Degree of protection | EN 60529:2000 |
| Current loading capacity | 150 mA, overload- and short-circuit protected (INT) |
| LED AUX | ext. auxiliary voltage UAUX; dual LED green/red green: voltage OK red: reverse voltage |
| Voltage | (UAUX – 0.5 V) |
| Auxiliary voltage (input) | 12 … 30 V DC PELV |
| IO code | 7 |
| Relative humidity | 85 % , noncondensing |
| MTTFd | 190 a |
| Mounting | DIN mounting rail |
| ID2 code | E |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...