Out of stock
The AS-Interface I/O module is a robust solution designed for seamless integration in industrial automation environments. It supports A/B slave configurations with the capability to connect up to 62 slaves, making it ideal for complex systems requiring extensive input and output management.
The AS-Interface I/O module is a critical component in modern industrial sensor networks, facilitating efficient communication between various sensors and control systems. This module is specifically engineered to support 3-wire sensor inputs, allowing for versatile application across a range of industrial settings. By utilizing an external auxiliary voltage for powering inputs and outputs, the module ensures reliable operation under demanding conditions.
Common applications include integration with Lenze Smart Motor drives and SEW MOVI-SWITCH systems, where the M12 connection provides a secure and efficient interface. The module also features communication monitoring to ensure system integrity, along with a function display that provides real-time information on bus status, auxiliary voltage, and input/output conditions. The cable piercing method with gold-plated contact pins enhances connectivity and signal quality, making this module a dependable choice for industrial automation.
| Rated operating voltage | 26.5 … 31.6 V from AS-Interface |
| Auxiliary voltage (output) | 20 … 30 V DC PELV |
| Current loading capacity | 500 mA , overload and short-circuit protected |
| Note | The flat cable routing is designed for 100 actuation cycles |
| Supply | from external auxiliary voltage UAUX |
| Input current | ≤ 8 mA (limited internally) |
| Voltage | ≥ (UAUX – 0.5 V) |
| ID code | A |
| Switching point | according to DIN EN 61131-2 0 (undamped) ≤ 0.5 mA 1 (damped) ≥ 2.0 mA |
| LED OUT | Switching state (output); 3 LED yellow |
| Parameter bits (programmable via AS-i) | function |
| Mass | 260 g |
| AS-Interface specification | V3.0 |
| Mounting | 2 clips with ∅ 8 mm drill hole |
| Input | EN 61131-2:2007 |
| Cable length | 2 m |
| Fieldbus standard | EN 62026-2:2013 |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
| Connection | AS-Interface, AUX: Insulation piercing technology Yellow flat cable/black flat cable Inputs/outputs: M12 round plug connector in accordance with EN 61076-2-101 Inputs: LF type (4-pin, bushing contacts, screw lock, A-coded) Matching connector: LM type or similar Outputs: LF type (4-pin, bushing contacts, screw lock, A-coded) Matching connector: LM type or similar |
| Supply | from external auxiliary voltage UAUX |
| Current | 2 A per output TB ≤ 40 °C: 6 A total TB ≤ 60 °C: OUT1+OUT2 max. 3 A, OUT3 max. 2 A |
| LED AUX | ext. auxiliary voltage UAUX; dual LED green/red green: voltage OK red: reverse voltage |
| IO code | 7 |
| Storage temperature | -25 … 85 °C (-13 … 185 °F) |
| Signal delay | < 1 ms (input/AS-Interface) |
| MTBF | 110 a |
| Rated operating current | ≤ 35 mA |
| LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or overload of outputs or external auxiliary voltage UAUX missing |
| Number/Type | 3 electronic outputs, PNP, overload and short-circuit proof |
| LED PWR | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 or overload of sensor power supply or overload of outputs or external auxiliary voltage UAUX missing |
| Ambient temperature | -25 … 60 °C (-13 … 140 °F) |
| Emitted interference | EN 61000-6-4:2007 |
| Number/Type | 4 Inputs for 3-wire sensors (PNP), DC |
| UL File Number | E223772 “”For use in NFPA 79 Applications only”” |
| Profile | S-7.A.E |
| Data bits (function via AS-Interface) | |
| LED IN | switching state (input); 4 LED yellow |
| ID1 code | 7 |
| Required master specification | ≥ V2.1 |
| Slave type | A/B slave |
| Degree of protection | EN 60529:2000 |
| Degree of protection | IP54 according to EN 60529 |
| ID2 code | E |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...