Out of stock
The AS-Interface sensor/actuator module serves as a reliable A/B slave, allowing for the integration of up to 62 devices within an AS-Interface network. Its robust design features a one-piece housing with a stainless steel base, ensuring durability in industrial environments.
The AS-Interface sensor/actuator module is designed for efficient communication and control in industrial automation applications. It acts as a crucial link in the AS-Interface network, facilitating the connection of various sensors and actuators. This module supports a variety of sensor types, including 2-, 3-, and 4-wire sensors, making it versatile for different applications.
Its installation is streamlined with tool-free setup and the incorporation of SPEEDCON technology for secure cable connections. The module also features red LEDs for visual indication of output overloads, enhancing troubleshooting efficiency. Furthermore, the communication monitoring capability is configurable, allowing for tailored solutions based on specific application needs. Ideal for DIN rail mounting, this module is suitable for a wide range of industrial settings, ensuring reliable data transmission and device management.
| Parameter bits (programmable via AS-i) | function |
| MTTFd | 190 a |
| Number/Type | 4 inputs for 2- or 3-wire sensors (PNP), DC option 2 inputs for 4-wire sensors (PNP), DC |
| Ambient temperature | -25 … 70 °C (-13 … 158 °F) |
| Signal delay | < 1 ms (input/AS-Interface) |
| Current loading capacity | 200 mA, overload and short-circuit protected |
| Data bits (function via AS-Interface) | |
| Profile | S-7.A.7 |
| Supply | from AS-Interface |
| Fieldbus standard | EN 62026-2:2013 |
| Degree of protection | IP67 |
| ID2 code | 7 |
| Tightening torque, cable gland | 0.4 Nm |
| LED PWR | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 |
| AS-Interface specification | V3.0 |
| Rated operating voltage | 26.5 … 31.6 V from AS-Interface |
| UL File Number | E223772 |
| Diagnostic Coverage (DC) | 0 % |
| Mission Time (TM) | 20 a |
| Pollution degree | 3 |
| Noise immunity | EN 61000-6-2:2005 EN 62026-2:2013 |
| IO code | 7 |
| Storage temperature | -25 … 85 °C (-13 … 185 °F) |
| Auxiliary voltage (output) | 24 V DC � 15 % PELV |
| AS-Interface | EN 62026-2:2013 |
| Required master specification | V3.0 |
| Voltage | (UAUX – 0.5 V) |
| Slave type | A/B slave |
| Degree of protection | EN 60529:2000 |
| Input current | 8 mA (limited internally) |
| Altitude | 2000 m above MSL |
| Voltage | 21 … 31 V |
| Connection | Cable piercing method flat cable yellow/flat cable black inputs/outputs: M12 round connector |
| LED OUT | Switching status (output); 4 yellow/red LEDs Yellow: output active Red: output overload |
| Mounting | Mounting plate |
| LED IN | switching state (input); 4 LED yellow |
| LED AUX | ext. auxiliary voltage UAUX; dual LED green/red green: voltage OK red: reverse voltage |
| Relative humidity | 85 % , noncondensing |
| Number/Type | 4 electronic outputs, PNP, overload and short-circuit proof |
| Emitted interference | EN 61000-6-4:2007 |
| ID code | A |
| Vibration resistance | 0.75 mm 10 … 57 Hz , 5 g 57 … 150 Hz, 20 cycles |
| Rated operating current | 40 mA (without sensors) / max. 240 mA |
| Protection class | III |
| Surge protection | UAUX, Uin: Over voltage category III, safe isolated power supplies (PELV) derived from mains up to 300 V AC line-to-neutral |
| LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or outputs |
| Current | 2 A per output 6 A total (TB 40 °C) 4 A total (TB 70 °C) |
| Shock and impact resistance | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks |
| Input | EN 61131-2 |
| Supply | from external auxiliary voltage UAUX |
| Mass | 230 g |
| ID1 code | 7 |
| Switching point | according to DIN EN 61131-2 (Type 2) |
| Climatic conditions | For indoor use only |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...