Out of stock
The AS-Interface gateway is a robust solution designed to facilitate seamless communication between AS-Interface networks and Ethernet Modbus TCP/IP environments. This gateway ensures compliance with AS-Interface specification 3.0, enabling efficient data transfer and device integration.
The AS-Interface gateway serves as a critical component in industrial automation systems, enabling the integration of field devices into higher-level Ethernet networks. It is commonly employed in applications where reliable communication between sensors, actuators, and control systems is essential. This gateway supports various functionalities, including duplicate addressing detection, which enhances network reliability and minimizes communication errors.
Equipped with an integrated webserver, the AS-Interface gateway allows for straightforward configuration and monitoring of the network status and diagnostic information. Features such as earth fault detection and AS-Interface noise detection provide operators with vital insights into network integrity, helping to preemptively address potential issues. The gateway’s capability to support both line and ring topologies through its integrated switch and DLR technology further enhances its versatility in diverse industrial environments.
| PLC-Functionality | activateable |
| LED U AS-i | AS-Interface voltage; LED green |
| Ethernet | RJ-45 |
| LED PRJ MODE | projecting mode active; LED yellow |
| Interface type | Chip card slot |
| Storage temperature | -25 … 85 °C (-13 … 185 °F) |
| LED AS-i ACTIVE | AS-Interface operation normal; LED green |
| UL File Number | E223772 only from low voltage, limited energy source (SELV or PELV) or listed Class 2 source |
| Rated operating current | 300 mA from AS-Interface |
| UL approval | An isolated source with a secondary open circuit voltage of 30 VDC with a 3 A maximum over current protection. Over current protection is not required when a Class 2 source is employed. UL mark does not provide UL certification for any functional safety rating or aspects of the device. |
| EMC monitoring | integrated |
| Duplicate address detection | from AS-Interface slaves |
| MTTFd | 105 a at 30 °C |
| Button | 4 |
| Protocol | EtherNet/IP + MODBUS TCP/IP acc. to IEEE 802.3 supports device level ring protocol DLR |
| Mass | 500 g |
| Degree of protection | EN 60529:2000 |
| Transfer rate | 10 MBit/s / 100 MBit/s , Automatic baud rate detection |
| AS-Interface | spring terminals, removable |
| Insulation voltage | 500 V |
| LED PRG ENABLE | autom. programming; LED green |
| LED CONFIG ERR | configuration error; LED red |
| Construction type | Low profile housing , Stainless steel |
| Interface type | RS 232, serial Diagnostic Interface |
| Degree of protection | IP20 |
| Earth fault detection | integrated |
| Rated operating voltage | from AS-Interface 30 V DC |
| Display | Illuminated graphical LC display for addressing and error messages |
| Transfer rate | 19,2 kBit/s |
| Interface type | 2 x RJ-45 |
| LED ETHERNET | ethernet active; LED green |
| EAC conformity | TR CU 020/2011 |
| Standards | EN 61000-6-2:2005, EN 61000-6-4:2007 EN 954-1:1996 (up to Kategorie 4), IEC 61508:2001 and EN 62061:2005 (up to SIL3) EN 13849:2008 (PL e) |
| LED POWER | voltage ON; LED green |
| AS-Interface | EN 62026-2:2013 |
| Ambient temperature | 0 … 55 °C (32 … 131 °F) |
| AS-Interface specification | V3.0 |
| Electromagnetic compatibility | EN 61000-6-2:2005, EN 61000-6-4:2007 |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...