Out of stock
The WirelessHART Gateway facilitates seamless communication between field devices using the WirelessHART protocol and Ethernet networks via EtherNet/IP. It offers advanced network analysis and straightforward configuration, ensuring efficient integration into existing systems.
The WirelessHART Gateway serves as a critical component in the field of industrial automation, specifically designed for environments requiring explosion protection. This gateway enables reliable wireless communication for HART-enabled devices, connecting them to Ethernet networks through the EtherNet/IP protocol. Its robust design makes it suitable for deployment in hazardous areas, ensuring safety and operational integrity.
Common applications of the WirelessHART Gateway include monitoring and control in industries such as oil and gas, chemical processing, and pharmaceuticals. The device supports both Ethernet and RS 485 interfaces, providing flexibility in connectivity options while maintaining compliance with the HART protocol. Additionally, it features a graphical network analysis tool that aids in network management and troubleshooting, enhancing overall system performance.
| Interface 2 | RS-485 |
| Degree of protection | IEC 60529 |
| Radio and telecommunication terminal equipment | The usage of 2.4 GHz equipment is bound to local restrictions. Ensure that restrictions allow usage of this product before commisioning. |
| Display elements | LED PWR (power supply status), one green LED LED COM (communication status), three yellow LEDs LED FLT (fault signal), one red LED |
| Relative humidity | 5 … 95 %, noncondensing |
| Ambient temperature | -20 … 60 °C (-4 … 140 °F) |
| IECEx approval | IECEx FMG 12.0002 |
| Vibration resistance | EN 60068-2-6 |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 test setup and execution acc. to EN 60068-2-60 |
| Interface | omnidirectional dipole antenna, removable |
| Mounting | wall mounting |
| Mass | approx. 1 kg |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Control elements | 2 push buttons: – restore HART configuration – restore communication configuration DIP switches: – baud rate – RS-485 address – RS-485 termination – security mode |
| Dimensions | 258 mm x 114 mm x 84 mm without antenna and cable glands |
| Connection | screw terminals for – 0.2 … 4 mm2 (rigid wire) – 0.2 … 2.5 mm2 (flexible wire) |
| Communication | WirelessHART specifications – physical layer: IEEE 802.15.4.2006 – frequency band: 2.4 GHz (ISM band, licence free) – transmission rate: 250 kBit/s – maximum transmit power: +10 dBm (EIRP) – transmission range: outdoor 250 m, indoor 50 m (under reference conditions) – communication standard: WirelessHART acc. to IEC 62591 |
| Interface 1 | Ethernet 10 BASE-T/100 BASE-TX , full galvanic isolation |
| Power consumption | < 5 W |
| Interface/interface | basic insulation according to IEC 61140, rated insulation voltage 50 Veff |
| Degree of protection | IP66/IP67 |
| Storage temperature | -40 … 85 °C (-40 … 185 °F) |
| FM approval | Coc3042646 |
| EU-Type Examination Certificate | FM 12 ATEX 0061 |
| Interface/power supply | basic insulation according to IEC 61140, rated insulation voltage 50 Veff |
| Shock resistance | EN 60068-2-27 |
Currently, the goods have no revocation.
Your feedback will be the first to
Share your thoughts, your opinion about the product.
Thank you for your feedback. In order to leave your feedback, simply fill out the form below.
The Ultrasonic sensor offers a versatile parameterization interface...
The Ultrasonic sensor offers an IO-link interface that...